: Go to Settings > About phone and tap Build number seven times until you see a message saying you are a developer.
Press and hold the Power button for roughly 10 to 15 seconds. The device will turn off and reboot normally into MagicOS.
Continue holding the until a white screen appears on your display. The screen will show an Android mascot or text indicating "Fastboot & Rescue Mode" . You can now release the button. Method 2: Use ADB Commands (Advanced)
Entering fastboot mode on HONOR 200 can seem intimidating, but it's a straightforward process once you know the steps. By following this guide, you should be able to access fastboot mode on your device and perform advanced operations. Remember to always be cautious when working with fastboot mode, as incorrect actions can potentially brick your device.
Open the on Windows and check if your device has a yellow exclamation mark. If it does, manually update your Google Android USB drivers. 3. Fastboot Commands Return "Command Not Allowed" How to Open Fastboot Mode on HONOR 200
: Release the button once you see the Fastboot and Rescue Mode screen (typically a white background with "Fastboot" text). Method 2: Using ADB (Android Debug Bridge)
Have a USB cable ready that is connected to your PC. Hold Volume Down: Press and hold the Volume Down button.
To open on your HONOR 200, you primarily use a combination of physical buttons while the device is connected to a computer. ⚡ Method 1: Hardware Buttons (Recommended)
for about 10–15 seconds until the screen turns black and the device restarts normally. Disconnect : Go to Settings > About phone and
: Plug your USB cable into your computer, but do not plug it into your phone yet.
Press and hold the and Volume Up button simultaneously.
Press and hold the Volume Down button on your HONOR 200.
Are you trying to or flash a specific file ? Continue holding the until a white screen appears
: Press and hold the Volume Down button on your phone.
Method 2: Open Fastboot Mode Using ADB Commands (Requires PC)
Press and hold the Volume Down button on your HONOR 200.
Look for a prompt on your phone screen asking to allow USB debugging, and tap . Next, input the reboot command: adb reboot bootloader
Press and hold the until the power menu appears. Tap Power Off and wait about 10 seconds for the device to vibrate, confirming it is completely shut down. Step 2: Connect to a Computer