Click Finish to open the MKS Laser Tool interface. Initial Setup and Configuration
Open Windows Device Manager. Check under "Ports (COM & LPT)" for CH340 . If there is a yellow warning triangle, reinstall the driver manually. Frequency incompatibility or hidden network.
The MKS Laser Tool Setup v1.12.exe download is a software update designed for users of MKS laser cutting and engraving machines. This review aims to provide an overview of the update, its features, and the overall user experience.
During the installation wizard, a prompt will appear asking to install the .
Do not use generic "EXE download" websites. Instead: mks laser tool setup v112exe download upd
Ensure you are using the correct .bin file specifically for your board version and that the connection is stable.
Complete Guide to MKS Laser Tool Setup V1.1.2: Download and Configuration
Set the . For the MKS DLC32 running ESP32-based Grbl_ESP32 firmware, the default baud rate is typically 115200 . For older 8-bit boards, it might be 250000.
You can find the software and official firmware on the Makerbase GitHub or through authorized partner sites like Longer Laser. Version 1.1.2 is widely used for updating firmware and configuring Wi-Fi on MKS DLC32 series boards. Download & Installation Click Finish to open the MKS Laser Tool interface
Press and hold the "Boot" button on the physical MKS board while clicking the flash button in the tool. Ensure the USB cable supports data transfer, not just power. Wrong laser mode configured in Grbl parameters.
Set up the ESP32 wireless connection for remote control.
Look under the "Tools" or "Software" directory inside the respective hardware repository.
The MKS Laser Tool is a critical software utility for makers and professionals using MKS DLC32 series motherboards and other laser engraving controllers. Finding the correct V1.1.2 executable is essential for ensuring hardware compatibility and stability during your engraving projects. 📥 MKS Laser Tool V1.1.2 Download Overview If there is a yellow warning triangle, reinstall
Enables basic motor control, laser switching, and homing capabilities from your PC. Why You Need the "v112exe" Update
Setting up version 1.1.2 ( MKS Laser Tool Setup V1.1.2.exe ) correctly ensures stable communication between your computer and your laser engraver. 1. Official Sources and Safe Download Practices
Connect your MKS board to your computer using your USB data cable. Power on your laser engraving machine.
1. Swap the USB cable.2. Hold down the button on the DLC32 board while clicking "Start Flash" in the software, then release it after 2 seconds. COM Port dropdown is empty Driver missing or loose connection.