TSW1250EVM: High-Speed LVDS Deserializer and Analysis System
The LD-C101 is a specialized interface cable designed to connect newer Icom radios, which typically have a USB-C port for their CI-V (Communication Interface V) control, to a computer's USB-A port. The "CI-V" is Icom's proprietary system for remotely controlling its transceivers, allowing you to change frequency, mode, and other settings from a PC.
If the driver looks healthy in Device Manager but the software cannot communicate with the radio, the issue is likely downstream. Ld-c101 Usb To Ci-v Driver
After the is installed, hardware configuration is necessary. The LD-C101 is not plug-and-play regarding radio settings.
This comprehensive guide covers everything you need to know about the LD-C101 interface driver, from identification and installation to configuring popular ham radio software. What is the LD-C101 USB to CI-V Interface? After the is installed, hardware configuration is necessary
Solution:
for the IC-706MKIIG); if the software is not set to the correct address, the "CAT Test" will fail even if the driver is functioning perfectly. Serial Port Selection What is the LD-C101 USB to CI-V Interface
Snap a mix-31 ferrite core onto both ends of the LD-C101 USB cable. Ensure your station equipment shares a unified RF ground network to dissipate stray energy away from your computer's USB sub-system. Conclusion
If you have a working radio, send FE FE 5E E0 03 FD (read frequency) to COMx. The radio should respond. Use a tool like or Hamlib :