Drag the drive's desktop disk volume icon directly into the Trash Can (which transforms into an Eject symbol), or click the Eject icon next to the volume name in Finder. Maintenance and Handling Cleanliness

Bare hard drives do not have the protection of an enclosed cooling fan casing. Do not run heavy read/write operations continuously for more than 2 to 3 hours to prevent overheating.

Disclaimer: This guide is community-created. The WLX893U3 is manufactured under various brand names (OURLINK, BrosTrend, Panda, etc.). Always verify your chipset using Device Manager (Hardware ID: USB\VID_0BDA&PID_8812).

Ensure you are using the original high-shielding USB 3.0 cable provided with the unit. Low-quality cables can drop signals under load.

: Connect the NVR's ethernet port to your wireless router using the included cable. Manual & Documentation Resources

Typically compatible with Windows 2000/XP/Vista/7/8/10/11, Mac OS, and Linux. 2. Initial Setup (Using with PC) Connect Power:

Featuring one SATA port and two IDE ports (2.5" and 3.5"). USB 3.0 Data Cable: For high-speed data transfer. Power Adapter (12V): Necessary for 3.5" desktop drives. 4-Pin Power Cable: Specifically for older IDE drives. 2. Hardware Installation Steps

Unpack the device and rotate the antennas to a vertical position for optimal signal reception. Insert the WLX893U3 into a USB port on your computer.

A: Yes, using the signed drivers from GitHub (aircrack-ng/rtl8812au). Windows 11 may show a warning, but you can force installation.

The drive should spin up using USB bus power (though the external power supply is recommended for stability). For 3.5" SATA/IDE Drives (Desktop Drives):

If you change your home router, forget your admin panel password, or experience persistent configuration errors, perform a physical hardware reset to return the device to its factory baseline.

Ensure your device matches the foundational electrical and interface hardware layout: Specification Drive Interface Support 2x SATA (2.5"/3.5"), 1x IDE (2.5"/3.5" PATA) Maximum Storage Capacity Up to 6TB per slot Host Connection Port USB 3.0 Type-A (Up to 5 Gbps SuperSpeed) Integrated Hub Ports 2x USB 2.0 Type-A pass-through Flash Memory Reader SD, microSD (TF), MS, M2, xD, CF slots Power Output Requirement External AC/DC Adapter (Input: 100-240V / Output: 12V, 3A ) Physical Dimensions 140mm x 130mm x 66mm

Connect the specialized external 12V DC power adapter into the rear power jack of the dock, then plug the adapter into an active wall outlet.

The WLX-893U3 is a robust, standalone device designed for high-speed access to multiple storage drives without the need for internal installation. With its "tool-free disassembly" and "hot-swappable" support, it is ideal for any home or office setting, providing an easy way to connect multiple drives simultaneously.