How To Reset Dahua Ip Camera Without Reset Button Better New! -

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

Download and install the latest version of on a computer connected to the same local network as the camera.

For specific models that lack a push-button but have internal contacts:

Hold the jumper short for a full 30 seconds while powering up. ConfigTool cannot find camera Different subnet masking how to reset dahua ip camera without reset button better

: Once you receive the result file, open ConfigTool, select the camera, and load the result file. You will then be prompted to set a new password.

for your specific camera.

: Download the Dahua ConfigTool from the official website. This public link is valid for 7 days

: Remove the outer dome cover or the rear plate of the bullet camera to expose the main printed circuit board (PCB).

Enter the camera’s IP address into a web browser (e.g., Internet Explorer is often preferred for older models). Log in with your admin credentials. Navigate to

Release the short, reassemble the housing, and allow the camera to boot up normally. Method 5: Request a Password Reset XML File Can’t copy the link right now

: Connect the GND of your serial adapter to the camera's metal casing. Identify the TX pin by connecting the RX pin of your serial device and powering up the camera. If you see scrolling text in your terminal, you've found the correct pin.

: Install the ConfigTool and scan your local network to find the camera.

: A QR code will appear on the screen. Open the DMSS app , go to Me > Password Security > Reset Device Password , and scan the code.

: Open a web browser (Chrome, Edge, or Firefox) and type the camera's IP address into the address bar. Enter the admin username and password—if unchanged, default credentials are typically admin (username) with no password, or admin with password 123456 for older models.

Use a screwdriver to carefully open the camera dome, bullet casing, or backplate.