The is a proprietary motherboard typically found in Acer Aspire desktop series (such as the Aspire XC and X series). Because it is an OEM (Original Equipment Manufacturer) board, it differs slightly from standard retail motherboards regarding screw alignment and front panel connectors.
: LED cables (Power and HDD) must be connected to the correct positive/negative pins to light up. If the LED doesn't work, flip the connector. The Power and Reset switches will work regardless of orientation. 3. Installation Steps Explaining PC Front Panel Connectors
Ensure the motherboard is not damaged. The AAHD3VC typically features: acer aahd3vc motherboard manual install
Lower the motherboard gently into the case. Align the rear ports with the openings in the I/O shield.
| Specification | Detail | | :--- | :--- | | | AMD Socket FM2+ | | Chipset | AMD A75 | | Form Factor | Micro-ATX | | Memory | 4x DDR3 DIMM slots, supports up to 32GB of non-ECC RAM. Speeds up to 1866 MHz (and 1333/1600 MHz). | | Expansion Slots | 1x PCIe x16, 3x PCIe 2.0 x1 | | Storage | 6x SATA 3.0 ports (6Gb/s) | | Rear I/O | 4x USB 2.0, 3x USB 3.0, VGA, HDMI, 2x PS/2, 7.1-channel audio | | Internal I/O | 1x 24-pin ATX power, 1x 4-pin CPU power, 2x fan headers, 3x USB 2.0, 2x USB 3.0 headers | The is a proprietary motherboard typically found in
Upon the first boot, the user should enter the BIOS (Basic Input/Output System) by pressing the designated key (usually F2 or Del for Acer boards) to verify that all RAM and storage drives are detected. Because this is a proprietary board, the BIOS options may be limited compared to retail boards, but checking the boot order and fan speeds is essential to ensure the hardware is functioning correctly.
Ensure your PC case supports micro-ATX (not all proprietary Acer cases use standard standoffs). Place the I/O shield included with the board into the case rear opening. If the LED doesn't work, flip the connector
Plug your SATA data cables into the SATA ports on the motherboard. Connect the other end to your SSD, HDD, or optical drive. Ensure your main operating system drive is connected to the lowest numbered port (usually SATA0 or SATA1). Front Panel Header Configurations (F_PANEL)