Apply the magnetic wand to the designated "Zero" sensor area on the receiver housing for 5 seconds, or initiate the zeroing command via the Dräger PolySoft software interface. The status LED will flash green during the zeroing process.
The manual describes an explosion-proof, open-path infrared gas detector designed for stationary monitoring of combustible hydrocarbons. This system, comprising a transmitter and a receiver, is capable of detecting gas concentrations at distances ranging from 4 to 200 meters. Key Technical Specifications
The Drager Pulsar 7000 is a versatile gas detection system that can be used in a wide range of applications, including industrial processing, oil and gas, chemical plants, and wastewater treatment. The system is designed to detect a variety of gases, including toxic and combustible gases, and provides real-time monitoring and alerts to ensure the safety of personnel and equipment. drager pulsar 7000 manual
4 meters to 120 meters (depending on the model variant).
Ultimate Guide to the Dräger Pulsar 7000: Manual, Operation, and Maintenance Apply the magnetic wand to the designated "Zero"
Use certified Ex-d or Ex-e cable glands matching the enclosure thread size (M20 or 3/4" NPT options). Terminal Block Connections
Ensure the cable glands match the hazardous area classification (Ex d or Ex e) and are tightened to seal against moisture. 4. Optical Alignment Procedure This system, comprising a transmitter and a receiver,
The mandatory maintenance tasks per interval include:
By following this guide and consulting the Drager Pulsar 7000 manual, you'll be able to get the most out of your gas detection system and ensure a safe working environment.
You can find these documents by:
Key safety warnings include: