Caraflo V200 Shower Instructions [upd] Here

Shut off the main water supply to the holiday home and drain the remaining lines.

Leave the shower valve flow handle in the fully open position.

By following these instructions, your Caraflo V200 shower will provide many years of reliable, comfortable, and safe service – keeping your caravan or holiday home a pleasure to use in every season. caraflo v200 shower instructions

Remove the chrome cover cap on the temperature control handle and unscrew the retaining screw to pull the handle off.

Before beginning installation, verify your existing layout matches the structural dimensions of the V200. This unit features full for optimal anti-scald protection. Specification Pipe Centres Spacing 45mm (Hole centres) Orientation Horizontal or Vertical installation Cartridge Style Screw-in Plastic Nylon with Vernet 0847 copper thermostat Tail Dimensions 45mm length x 20mm outlet diameter Physical Dimensions Height: 165mm (vertical) Compatible Pods Plast-Tech, Bridgewood, and Lamplas shower cubicles ⚙️ Step-by-Step Installation Instructions Shut off the main water supply to the

The Caraflo V200 is a high-quality unit built to last, but it has some key specifications you should be aware of to ensure it works properly and safely.

Before installing or replacing your unit, ensure your system matches the precise dimensions and industry compliance standards of the genuine Caraflo V200: 45mm exactly Inlet/Outlet Connections: 1/2" BSP male threads Remove the chrome cover cap on the temperature

Turn the flow control handle (typically the left knob or lever mechanism) counter-clockwise to turn the shower on and gradually increase water pressure. Turn it clockwise to shut the water off completely.

The thermostatic cartridge is clogged with limescale, or the hot water supply is insufficient.

Open all drain-down valves on the underside of your caravan chassis to evacuate remaining water from the shower supply lines. Troubleshooting Common Issues Potential Cause Inlets are reversed or supply is blocked

Unscrew the cartridge retaining nut or grub screw (located on the underside or rear of the valve body).