Point-n-measure Digital Tape | W5746 User Manual

Please check your package contains the following items:

If you can tell me you're seeing, I can give you a more precise troubleshooting step. SOLVED: Performance Tools W5746 Point-N-Measure Digital

Use this to measure height where you cannot reach the top (e.g., ceiling height).

Ensure the base of the device is flush against a solid, stationary surface and that the target surface is flat. Point-N-Measure Digital Tape W5746 User Manual

By default, the device measures from its rear edge. Press the UNIT/REF button to toggle between front-edge reference and rear-edge reference. 📏 How to Use the Digital Laser Measure

Select your desired unit of measurement by pressing the button.

Slide off the battery compartment cover located on the back of the device. Please check your package contains the following items:

Switches between metric and imperial systems, or selects area/volume modes.

Using the laser function is straightforward and designed for one-person operation.

Press the button twice until the 3D cube icon appears. Measure the length using the MEASURE button. Measure the width using the MEASURE button. By default, the device measures from its rear edge

Good for DIY projects like measuring for paint or carpet without a helper. Cons:

Disclaimer: This guide is based on general product information for the Performance Tool W5746. Always check the specific manual included with your unit if available, as some online sources indicate user manuals may be hard to find.

Turn the device on and select your preferred units (inches, feet, or centimeters).

Wipe dirt and debris off the physical steel blade before retracting it to prevent internal jams. ❓ Troubleshooting Guide Error Code / Symptom Potential Cause Screen won't turn on Dead battery Charge via USB-C for at least 30 minutes. Error Code: Err 101 Reflected laser signal is too weak

: The device can automatically calculate square footage or cubic feet by taking consecutive length, width, and height readings.