The software updates for this model typically enable or improve: Connection via USB WiFi adapters.
The screen will display the software version found on the USB. Confirm that you want to proceed with the installation. Do not turn off the power at any point during the writing process. The screen will go black, and the receiver will restart automatically.
Download the official iclass k9k9 hd pvr compact software package. iclass k9k9 hd pvr compact software 17 install
Once the receiver reboots, the update is installed, but you should take a few moments to ensure everything operates perfectly:
Turn completely the physical power switch at the back of your iCLASS K9K9 HD PVR Compact The software updates for this model typically enable
Once the receiver restarts a final time, go to -> System Information to verify that the software version line accurately displays v1.17 .
Enter your system PIN when prompted (the default master PIN for iClass receivers is usually 0000 ). Confirm the reset and let the receiver reboot a final time. Troubleshooting Common Installation Issues Do not turn off the power at any
Once the connection is established, the software will begin erasing the flash memory and writing the new firmware. Wait for the completion bar to hit 100%. This usually takes about 5-10 minutes. Once done, turn off the receiver, disconnect the RS232 cable, and restart normally.
As of the current release cycle, iClass developers have indicated that Version 17 is the "Long Term Support" (LTS) build for the K9K9 HD PVR Compact. There is a beta Version 18 circulating, but users report unstable PVR timers. unless you enjoy beta testing.
Installing the latest firmware on an is generally done via a USB flash drive. While official software support for this model has aged, community archives often host the necessary files. Pre-Installation Checklist