Instal Xprinter Xp-d4601b Jun 2026
đź’ˇ Skipping Labels: This is a calibration issue. Turn off the printer, hold the Feed button, and turn it back on. Release the button after the printer starts moving the paper to re-calibrate the sensor.
The print settings are likely too hot or too fast. Open Printing Preferences , reduce the print speed, and lower the darkness setting slightly.
Run the downloaded .exe file (e.g., Xprinter Driver Setup.exe ).
Before connecting the printer to your computer, you must get the hardware situated and loaded with your thermal paper. instal xprinter xp-d4601b
To load labels into the Xprinter XP-D4601B:
Even with a perfect installation, you may encounter issues. Here is a guide to the most common problems.
Complete Guide: How to Install the Xprinter XP-D4601B Barcode Label Printer đź’ˇ Skipping Labels: This is a calibration issue
The Xprinter XP-D4601B requires specific drivers to translate document layouts into thermal print commands. Seagull Scientific drivers are highly recommended for Windows systems due to their stability. For Windows Users
The #1 complaint after you instal Xprinter XP-D4601B is: “It prints on the wrong part of the label!” This is a , not a driver issue.
: Connect the power adapter to the back of the printer and plug it into an outlet. The print settings are likely too hot or too fast
Before installing software, ensure the printer is physically ready:
Remove the printer, power cable, USB cable, and driver CD (if included) from the box.