Select the specific user profile (A or B) you wish to clear using the setup guide steps.
The display will first show the of the last 3 measurements stored in that user profile.
Insert 4 AAA alkaline batteries according to the polarity signs (+/-). Alternatively, plug the included Type-C cable into a certified 5V wall adapter. Replace the battery cover. Setting the Date, Time, and User Profile
is built for portability and ease of use, often including a voice broadcast function to read results aloud. : (Arm Type) electronic blood pressure monitor x180 manual
If your device displays an error message or fails to function correctly, consult this quick reference table: Error Code / Symptom Potential Cause Signal too weak or cuff is too loose. Re-wrap the cuff snugly and try again. E-3 Cuff is overly inflated or pressure is too high. Relax, sit quietly, and retest without moving. E-5 Movement or talking during testing. Stay completely silent and motionless while inflating. No display when pressing buttons Dead or incorrectly installed batteries. Check the orientation or replace old batteries. 8. Care, Maintenance, and Specifications Cleaning and Storage
: Pressure 0–299 mmHg (±3 mmHg accuracy) and Pulse 40–200 bpm.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Select the specific user profile (A or B)
Indicates an Irregular Heartbeat (IHB) was detected during the reading. If this icon appears frequently, consult your healthcare practitioner.
When the measurement concludes, the air exhausts entirely, and your Systolic, Diastolic, and Pulse rate will display simultaneously on the LCD screen.
Rest for 5 minutes and repeat measurement. If error persists, service is required. Batteries dead or installed backward. Alternatively, plug the included Type-C cable into a
Proper preparation ensures device longevity and measurement consistency. Installing the Batteries
Used to configure the date, time, and user profiles. MEM (Memory) Button: Accesses stored past readings.
into the compartment on the bottom of the device, ensuring the polarity (+/-) matches the markings. Some models also support a DC 6V power adapter Connecting the Cuff : Plug the air tube connector firmly into the left side port of the monitor. Setting Date/Time : With the device off, hold the "S" button for about 3 seconds until the year flashes. Use the "M" button
Press the button. All display symbols will briefly appear on the screen, and the device will automatically begin to inflate.