V1 Jet-em Manual: Alpha

[Pre-Check] ➔ [Fluid Prime] ➔ [Power On] ➔ [Pressure Adjustment] ➔ [Operation] Pre-Start Checklist Check that all fluid connections are leak-free. Ensure the water supply source is turned completely on.

Hidden on page 187 of the is the preventive maintenance checklist. Most users ignore it until a failure occurs.

: Ensure there is sufficient water flow. Most Alpha heaters only operate when they detect enough flow to trigger the internal switch.

Apply Teflon thread sealant to all NPT fittings, ensuring no excess tape enters the fluid pathway. Step 3: Electrical Wiring

Protects the internal circuit from voltage surges.

Whether you’ve just unboxed one or are looking for the manual's highlights to troubleshoot a chilly morning, this guide covers everything you need to know.

Insufficient water supply, clogged inlet filter, or a kinked supply line.

Standard Jet Start Procedure:

Use only high-pressure, braided stainless steel hoses rated for at least 6,000 PSI.

Reassemble the components carefully, ensuring the internal O-rings are lightly lubricated with chemical-resistant vacuum grease. 6. Troubleshooting Matrix Probable Cause Corrective Action

Ensure the ink stream enters the center of the gutter Charge Electrode: Clean and dry; check for ink misting