The installer is typically named 40002537_6.05_N.exe . 2. Critical Installation Steps

Older versions of the Edgeport hardware sometimes fail to enumerate when connected to newer USB 3.0 (blue) host controller ports.

Navigate to the official website. Search for Edgeport/1 in the product support section. Select Drivers and filter by Windows 10 (64-bit) .

Launch the application. It will display an overview of all connected Edgeport devices. Select your Edgeport/1 from the list and click .

Once installed, you can manage your new COM port via the : Open the Start Menu and look for the Digi USB folder. Launch the Edgeport Configuration Utility .

After the installer finishes, connect your to an available USB port on your computer. The driver should now install automatically without any further input from you.

How to Install the Digi Edgeport/1 Driver on Windows 10 (64-Bit)

Digi Edgeport 1 Driver Windows 10 64-Bit: Installation Guide and Solutions

Although the Edgeport 1 is a legacy device, Digi International maintains a unified driver package that supports it.

Not necessarily. The LED on an Edgeport/1 lights up only when a serial application opens the port. If the LED stays off, check that your software has claimed the COM port. If the LED never lights even after opening the port, try a different USB cable or test on another PC.