Motorola Cp1300 Frequency List Fix -

Switchable between 12.5 kHz and 25 kHz per channel.

The screen will display "PROG" to indicate it is in programming mode. Enter your administrator password (if configured).

Operates in the 136–174 MHz range. Best suited for outdoor use, large open fields, or rural areas where signals need to travel long distances over open terrain.

Input your specific RX, TX, and PL data into the channel matrix table. Click to upload the new frequency list to the device. Method 2: Front Panel Programming (FPP) motorola cp1300 frequency list

UHF Factory Default Channels (403–446 MHz / 435–480 MHz) Frequency (MHz) CTCSS/PL Tone 2 3 4 5 6 7 8 9 10 11-99 Deactivated / Available for Custom Programming

To optimize your fleet, you must program specific licensed frequencies into your CP1300. The radio features a full alphanumeric keypad, allowing for limited Front Panel Programming (FPP), though Customer Programming Software (CPS) remains the industry standard for mass deployment. Essential Programming Parameters

Select your interference eliminator code () if needed. Switchable between 12

Note: Frequencies above 470 MHz vary heavily depending on local country allocations. Always cross-reference your local telecommunications authority regulations before transmitting. Technical Specifications for Frequency Configuration

You will need a custom Motorola multi-pin programming cable (specifically designed for the CP series/Mag One style jacks) and a USB port.

Connect the PMKN4011 cable to your computer and the CP1300 accessory port. Turn on the radio and launch the . Click Read to pull the current data profile from the radio. Navigate to the Conventional Receiver / Transmitter menu. Operates in the 136–174 MHz range

Turn off the radio, connect the cable to the side accessory port, plug the USB into your PC, and turn the radio back on.

Be extremely cautious of generic frequency lists you might find online. These lists often contain frequencies used by police, fire departments, or other critical services.