Hitarget V30 Plus Manual [ Android ]

Connect the CL-4400 charger to an AC outlet. A solid red light indicates charging, while a solid green light indicates a full charge. Base Station Assembly

If you need help configuring a specific part of your system, please share your current (Internal UHF or CORS network) and the exact software version you are running. Share public link

Measure the instrument height from the ground control point to the bottom of the receiver or the middle measuring line, and record this value. Rover Assembly

: Flashes to indicate data transmission via internal UHF radio or cellular network. Ports and Connections hitarget v30 plus manual

Disconnect the controller from the Base and connect it to the Rover receiver via Bluetooth. Navigate to the menu and select Rover . Set the Data Link to Internal Radio .

: Connects the external UHF radio whip antenna.

The Hi-Target V30 Plus integrates a multi-constellation GNSS engine, a built-in transceiver UHF radio, and a cellular module into a rugged, compact housing. Key Technical Specifications Connect the CL-4400 charger to an AC outlet

Data Link LED: Flashes red or green to indicate UHF radio or network data transmission.

IP67 dustproof and waterproof; survives a 2-meter natural drop onto concrete. LED Indicator Lights and Control Panel

Static surveys are typically used to establish primary control networks with ultra-high precision. Share public link Measure the instrument height from

Do you need instructions for a specific ? Share public link

The manual highlights several one-key operations that allow you to manage the device without always needing a controller: Long press (1s) Power Off Long press (3–6s) until the "Dingdong" voice prompt Switch Work Mode

Located on the front panel. Press and hold for 3 seconds to power on or off. A short press prompts the device to broadcast its current status via voice. LED Indicators: