For the PST 54 PE, ensure the tool is before starting.
Before firing up your tool, verify that your local power supply matches the specifications printed on the machine's nameplate. Specification 220V - 240V AC Power Input No-Load Stroke Rate 500 – 3,000 strokes per minute (spm) Max Cutting Depth (Wood) 54 mm (~2.1 inches) Max Cutting Depth (Aluminium) Max Cutting Depth (Steel) Bevel Cutting Angle Up to 45° (Left and Right) Weight 1.85 kg (approx. 4 lbs) Core Features & UI Controls 1. Variable Stroke Rate Control (Dial Wheel) Scie sauteuse Jigsaw - Farnell
Bosch jigsaws usually feature a tool-free blade change system on this model.
After switching off, wait until the blade comes to a complete stop before setting the tool down to avoid damage to the workpiece or injury. 4. Operating Instructions Inserting and Changing the Saw Blade i--- Bosch Pst 54 Pe Manual
Before plugging in your tool, you must understand the basic safety guidelines outlined by Bosch to prevent injury or equipment damage.
Familiarize yourself with the layout of the Bosch PST 54 PE before plugging it into a power source:
Check outlet and fuse; inspect cord for breaks; check/replace carbon brushes. Too much forward pressure; bent blade; worn guide roller. For the PST 54 PE, ensure the tool is before starting
Slide the footplate slightly backward or forward (depending on the locking tabs) and tilt it to the desired angle using the scale marked on the housing. Tighten the footplate screw securely.
Use the provided Allen key (usually stored on the cord clip or base plate) to loosen the blade fixing screw.
The blade change process on the PST 54 PE is straightforward, though it does require a simple tool. . Here is the process: 4 lbs) Core Features & UI Controls 1
Understanding the limits and capabilities of your tool prevents motor burnout and ensures you use the correct accessories. The Bosch PST 54 PE operates under the following general parameters: 380 Watts Stroke Rate: 500 to 3,100 strokes per minute (SPM) Speed Regulation: Electronic variable speed dial Cutting Capacity in Wood: Up to 54 mm Cutting Capacity in Steel: Up to 3 mm Cutting Capacity in Aluminium: Up to 6 mm Bevel Cuts: Adjustable footplate from 0∘0 raised to the composed with power 45∘45 raised to the composed with power (both left and right) Weight: Approximately 1.6 kg 2. Key Components and Features
If you cannot find your manual yet, here are the critical specs you need to operate the machine safely: