Lifetime Free Plan for 25 Endpoints,
No Strings Attached.
Fill out the form to create your account and get started.
The original software shipped with the ACHI IR6500 was designed during the Windows XP and Windows 7 eras. If you try to install the stock software on modern computers today, you will likely encounter several critical failures:
To develop reliable profiles, users should run controlled tests to characterize their specific station’s behavior. One forum contributor documented their preheater testing procedure:
For most users, using third-party, updated software (like Rework Pro) is more effective than attempting to patch the original 2014-era IRSOFT. USB Connection:
Do you know if your station uses the controller?
Always remember that software is only a tool for monitoring. Infrared rework involves extreme heat. Even with a patched software suite, you should:
Once the patched software and drivers are installed, launch the application and attempt to open the COM port connection. The station should respond by displaying real-time temperature readings from both the top and bottom sensors. If the connection fails, systematically verify each configuration step, paying particular attention to COM port numbers and baud rate settings.
The original software shipped with the ACHI IR6500 was designed during the Windows XP and Windows 7 eras. If you try to install the stock software on modern computers today, you will likely encounter several critical failures:
To develop reliable profiles, users should run controlled tests to characterize their specific station’s behavior. One forum contributor documented their preheater testing procedure: achi ir6500 software patched
For most users, using third-party, updated software (like Rework Pro) is more effective than attempting to patch the original 2014-era IRSOFT. USB Connection: The original software shipped with the ACHI IR6500
Do you know if your station uses the controller? USB Connection: Do you know if your station
Always remember that software is only a tool for monitoring. Infrared rework involves extreme heat. Even with a patched software suite, you should:
Once the patched software and drivers are installed, launch the application and attempt to open the COM port connection. The station should respond by displaying real-time temperature readings from both the top and bottom sensors. If the connection fails, systematically verify each configuration step, paying particular attention to COM port numbers and baud rate settings.