Connect the provided USB-C cable to the port at the front tip of the mouse.
By following this manual and exploring the features and functions of your Pangyingo wireless mouse, you'll be able to enjoy a seamless computing experience.
Use a slightly damp, lint-free cloth to wipe the exterior. Avoid getting moisture into the optical sensor.
The computer will automatically detect the mouse. It is ready for use within seconds. Method 2: Connecting via Bluetooth (Dual-Mode Models) Turn the power switch on the bottom of the mouse to .
The computer should automatically install the drivers and recognize the mouse within seconds. pangyingo wireless mouse manual
To help finalize your setup, let me know you use, your specific computer model , or what specific issue you are experiencing. Share public link
Insert the required batteries (usually 1x AA or 2x AAA—check your specific model) observing the correct polarity (+/-). Replace the battery cover. Step 2: Locate the USB Receiver
When the battery runs low, the cursor movement may become laggy, or the internal LED indicator will flash red.
Activates after 8 to 10 minutes of complete inactivity. The optical sensor turns off entirely. Connect the provided USB-C cable to the port
Use a proper mouse pad; some surfaces (like glass) interfere with optical sensors.
If the computer went to sleep, click the left mouse button to wake the hardware connection. Issue 3: The mouse disconnects frequently
Wipe the exterior chassis with a microfiber cloth slightly dampened with water or a mild isopropyl alcohol solution.
Disclaimer: This manual is a general guide based on typical Pangyingo wireless mouse designs. Specific features may vary slightly depending on the exact model number. If you'd like, I can: Avoid getting moisture into the optical sensor
Use this mode for tablets, smartphones, or laptops with limited USB ports.
To conserve battery life, the mouse enters a "Deep Sleep" mode after several minutes of inactivity. Simply click any button to wake it up.
Plug the receiver directly into an available USB-A port on your desktop, laptop, or docking station. Step 3: Power On and Sync