Audi A3 8v Coding List Guide

Coding → Byte 11 → Enable Bit 6 ("Blower status display in auto mode active"). Disable Engine Start/Stop System

Module 09 → Adaptation → "Schlüssel-Komfort-Öffnen/Schliessen" → Set to "Active". Stop/Start Deactivation

| Module | Security Code | | :--- | :--- | | 09 – Central Electrics | 31347 | | 17 – Instrument Cluster | 20103 | | 44 – Steering Assist | 19249 | | 5F – Infotainment | 20103 or 31347 | audi a3 8v coding list

This is a comprehensive guide to the coding list.

: Though not always a direct "off" switch, you can often disable it by changing the voltage limit or ambient temperature requirements. Coding → Byte 11 → Enable Bit 6

Tools used: VCDS (Select Control Module → Coding → Long Coding Helper) or OBDeleven (Apps or Expert Mode).

: Unlocks the oil temperature display and a lap timer in the Driver Information System (DIS) or Virtual Cockpit. : Though not always a direct "off" switch,

Adaptations → Search Leuchte2SL VLB10 (Left) and Leuchte3SL VRB21 (Right).

Prevents the auto start/stop from defaulting to “On” each ignition cycle.

: Adds a lap timer function to the DIS (Driver Information System). Module 17 → Coding → Byte 1 → Enable Bit 3. Throttle Response (Direct/Linear)