Top - Eeupdate64eefi

I'm looking for documentation on the eeupdate64eefi utility, specifically regarding the use of the keyword "top". Is this a valid parameter to select the primary adapter, or is this referring to the Linux top command?

Master Guide to eeupdate64e.efi : Intel Network Adapter Configuration in UEFI

: You can view, set, or update the MAC address of specific Intel network chips (e.g., Intel 82574, I210, X550) directly from the UEFI shell. Firmware & NVM Updates eeupdate64eefi top

Do not force-flash an .eep or .bin configuration intended for an Intel i210 controller onto an Intel i350 or x550 controller. This will result in permanent hardware initialization failures. If you are currently troubleshooting an issue, let me know: What specific Intel NIC controller model you are modifying? What error message or status code you are encountering?

Assigning specific physical addresses to a motherboard or network adapter during manufacturing, custom system building, or system recovery. I'm looking for documentation on the eeupdate64eefi utility,

He hit enter. The tool identified the Intel NIC, flashed the EEPROM, and verified the checksum. Success.

) should be placed on a FAT32-formatted USB drive, which the UEFI Shell can read Intel Controllers: The tool only works with Intel-based network controllers (e.g., I210, I350, X710 series) command syntax Firmware & NVM Updates Do not force-flash an

Frustrated, Alex did what the retired admin probably should have done: he ran the help command to see what the tool actually wanted.

: Use the /DUMP command to save the original state of the NIC.

: Always run /dump before attempting to flash or change a MAC address.