Shell Alvania G3 Data Sheet __top__ File

Frequently specified as the factory fill for bearings that do not require relubrication over their operating lifespan. Shell Product Evolution: What Replaced Alvania G3?

Shell Alvania G3 is a versatile, NLGI 3 grade grease offering a balance of mechanical stability, water resistance, and corrosion protection. Its firmer consistency compared to NLGI 2 grades makes it ideal for vertical shafts, poorly sealed housings, or applications requiring reduced oil separation. It is a cost-effective solution for general industrial and agricultural lubrication where extreme temperatures or pressures are not present.

Below is a scannable technical report compiled from the official safety and technical data parameters. 🛠️ Product Overview : Lithium soap Base Oil : Highly refined mineral oil NLGI Consistency : 3 Color : Brown Texture : Smooth and homogenous 💡 Key Benefits & Applications Shell Alvania Grease EPD

Note: For operation near the upper temperature limits, re-lubrication frequencies must be increased significantly to prevent oil oxidation. Brand Transition Notice: Alvania to Gadus shell alvania g3 data sheet

. While Shell has transitioned many of its legacy product names to the modern line, Alvania G3

While Shell Alvania G3 is no longer in active production, understanding its specifications and performance profile is essential for legacy equipment maintenance, cross‑referencing, and selecting appropriate modern replacements. Users seeking a current‑generation equivalent should evaluate the or consult directly with Shell technical specialists.

| Property | Method | Value | |----------|--------|-------| | NLGI Grade | ASTM D217 | 2 | | Thickener Type | – | Lithium hydroxystearate | | Base Oil Viscosity @ 40°C | ASTM D445 | ~150–220 cSt | | Dropping Point | IP 132 | >180°C (356°F) | | Operating Temperature Range | – | -20°C to +120°C (-4°F to +248°F) (short peaks up to 130°C / 266°F) | | Water Washout @ 79°C | ASTM D1264 | < 5% weight loss | | Copper Corrosion (24h/100°C) | ASTM D4048 | 1b (pass) | | 4-Ball Weld Load (ASTM D2596) | – | > 250 kg | | Rust Protection (SKF EMCOR) | IP 220 | 0-0 (pass) | Frequently specified as the factory fill for bearings

Store in a cool, dry place away from direct sunlight and heat sources. EP (Extreme Pressure) variant for heavy-load applications? Shell Gadus S2 V220 1

Shell Alvania G3 is a high-performance, lithium-based grease designed for use in a wide range of industrial and automotive applications. This data sheet provides an overview of the key characteristics, features, and benefits of Shell Alvania G3, as well as its typical properties and performance data.

Designed for long-duration service in applications where frequent re-greasing is difficult or not required. Shell Iraq Common Applications Industrial Bearings: Its firmer consistency compared to NLGI 2 grades

Key features of the Alvania G series include:

| Parameter | Value/Description | Notes/Source | | :--- | :--- | :--- | | | Shell Alvania G | General-purpose, multipurpose grease | | Thickener Type | Lithium 12-Hydroxystearate Soap | Provides smooth texture and mechanical stability | | Base Oil Type | Highly Refined Mineral Oil | High Viscosity Index (HVI) mineral oil | | Base Oil Viscosity | ISO VG 100 | Equivalent to approximately 100 mm²/s at 40°C | | NLGI Grade | 3 | A higher consistency grade, meaning it's a firm grease | | Appearance/Texture | Smooth | Smooth-textured industrial grease | | Recommended Operating Temp. | -30°C to +130°C | General recommended working temperature range (G series) | | Dropping Point | > 190°C (approx.) | Derived from data of its successor, Shell Gadus S2 V100 3 | | Worked Penetration | 220-250 0.1mm | Derived from successor data (consistent for NLGI Grade 3) |